During vacations, it is common for individuals to leave their robotic pool cleaners in the pool by utilizing weekly timers. Nevertheless, prolonged exposure can gradually harm these robots, even in water that is chemically balanced. Plastics deteriorate rapidly when pH levels are low, while metal parts corrode in saltwater. As per the manufacturer’s instructions, it is advisable to remove the unit after each cleaning cycle. The main causes of deterioration are sun exposure and poor water quality. To ensure the longevity of your pool robot, store it away from sunlight and maintain proper pool chemistry.
Can you leave a robotic pool cleaner in the pool?
Leaving your robotic pool cleaner submerged for extended periods can cause its filters to become clogged and its plastic exterior to deteriorate. To ensure optimal performance, it is recommended to remove the robot from the water after each cleaning cycle and clean its filters.
While robotic pool cleaners are designed to be waterproof, it is not advisable to leave them in the pool permanently. Neglecting filter maintenance can lead to clogged and inefficient filters. By regularly removing your robotic cleaner, you can prevent such issues and ensure its proper functioning.
Can I leave my Dolphin robotic cleaner in the pool?
Remember to take out your Dolphin pool robot from the pool after each cleaning cycle to empty and clean its filters. When not in use, store the robot in a dry place, away from sunlight. It’s also important to regularly rinse the robot with clean water to get rid of any excess pool chemicals.
If your robot has a weekly programmer, you can leave it in the pool for up to a week. However, make sure to clean the filter after this extended cycle finishes. If you plan on leaving the robot in the pool for a long time, make sure to maintain proper water balance to ensure its efficiency and prevent premature wear. Imbalanced chemicals can lead to clogged filters and reduced motor power.
Lastly, if you’ve recently shocked the pool, wait at least one full day before putting the robot back in the water.
How long can I leave my Dolphin robot in the pool?
The Dolphin robotic pool cleaner has a built-in feature that automatically turns it off after a few hours of regular use. Although it is safe to leave the cleaner in the water for extended periods when not in use, the manufacturer recommends removing it after each cleaning session.
If your model has a weekly timer, you can let the robot run continuously for a full week. However, it is important to take out the Dolphin robot from the pool when adding chemicals until the chlorine, pH, and salinity levels are properly balanced.
Generally, it is perfectly fine to leave the cleaner in the pool for a few hours between uses. Many people run it overnight and remove it in the morning. Just remember to remove the Dolphin before adding any chemicals and restore the proper chemical balance first. Afterward, store the cleaner in a dry and shaded area, and make sure to rinse it regularly to prevent the buildup of chemicals or salt.
Overall, the manufacturer advises removing your Dolphin pool robot after each use to empty and clean its filters.
Do pool chemicals damage robotic pool cleaners?
An elevated pH level can lead to scaling, while a low pH level can be corrosive and cause damage to the parts of your pool cleaner. Over time, chlorine can wear down the cleaners, and shock treatments can accelerate this damage. To achieve the best results, it is recommended to remove the cleaner after each cleaning cycle. Make sure to empty the filter canister or debris bag and rinse it thoroughly with fresh water before returning it to the pool. The corrosive nature of chlorine can harm the wheels, filters, and other parts of the cleaner. Even with balanced water chemistry, chemicals can still degrade the materials.
Before using a new robotic pool cleaner, it is important to test and balance the water chemistry. These pool robots can be quite expensive, so taking proper care of them is crucial. Avoid adding chemicals to the pool while the robotic cleaner is in it, as high concentrations can cause harm.
By properly balancing the water, you can reduce the damage caused by chemicals when using the robotic pool cleaner frequently, such as every day. Remember to rinse the cleaner after each use to prevent problems that may arise from prolonged submersion, unbalanced pH levels, and alkalinity.
Can you leave an automatic pool cleaner in the pool?
Automatic pool cleaners are specifically designed to operate efficiently in water, enduring regular use and wear. Their automated cleaning capabilities make them highly convenient and widely popular. However, it is important to note that repairing them can be quite expensive. To ensure their longevity, proper maintenance and storage practices are crucial. Excessive exposure to sunlight can cause colors to fade prematurely and can also damage plastic and rubber components.
Many pool owners tend to leave their cleaners in the pool indefinitely. For suction cleaners, it is advisable to regularly empty pump strainers, clean skimmer baskets, and keep filters in good condition to minimize pump wear. In areas with intense sunlight or before storms, it is recommended to remove the cleaner from the pool and store it safely. Additionally, it is important to remove the cleaners when they are not in use, as rainwater can alter the water chemistry and potentially damage the cleaners.
Leaving automatic pool cleaners in the pool while swimmers are present can pose a risk of entanglement, as suction, pressure, and robotic cleaners all have hoses or cords that can endanger swimmers. Thus, it is best to remove it from the pool before you swim.
Prolonged exposure to sunlight can also cause damage to the cleaners. Therefore, it is advisable to remove automatic cleaners from the pool after each use, as this allows for inspection and necessary maintenance. The longer the automatic cleaner remains in the pool, the greater the risk of chemical exposure damaging the wheels, plastic, and metal components.
Conclusion
In conclusion, it is recommended that you remove a robotic pool cleaner after each cleaning cycle, give it a rinse with fresh water, and store it in a shaded area that is protected from the sun, wind, and rain. This helps to prolong the life of the seals and plastics. Although the robotic cleaner is waterproof and can be submerged for extended periods, continuous exposure to pool chemicals and sunlight can cause the components to deteriorate over time.
Once you remove the cleaner, make sure to clean its filter basket thoroughly to prevent any debris from clogging the system. By properly maintaining it, such as frequent rinsing and storing it in a protected spot, your robotic pool cleaner will continue to provide reliable service for many years.
Photo by Giorgio Trovato on Unsplash.