Are you searching for a new single speed pool pump for your inground swimming pool? Maybe you want to replace your old single speed pump that has screeched to a halt? You may consider the Hayward Super Pump.
The Hayward Super Pump has been one of the best selling pool pumps for a long time. It gives a reliable performance at an affordable price.
Our review of the Hayward Super Pump lists its most important features. It also answers a few questions before reaching a conclusion.
What are the key features of the Hayward Super Pump?
Here is a list with its most important features:
- Created for permanently installed inground swimming pools.
- Easy service: dismantle motor and drive assembly by removing four bolts.
- It has a big strainer basket that catches and holds many leaves.
- Pump components are molded from corrosion-proof PermaGlass.
- Pump motor has automatic thermal overload protection against overheating.
- Self-priming centrifugal pump with a diffuser which primes within 5 minutes.
- Single phase, 60Hz, 3450 RPM, single speed motor.
- Swing-aside hand knobs make the transparent strainer cover easy to remove.
- Uni-bracket mounting base can adapt to 48 and 56 frame motors.
The following Hayward Super Pump motor sizes are available: 1/2, 3/4, 1, 1-1/2, 2 and 2-1/2 horsepower.
What port sizes does it have?
There are two port sizes depending on the horsepower of the pump motor. The 1/2 to 1-1/2 horsepower Super Pumps have 1-1/2-inch port sizes. The 2 to 2-1/2 horsepower Super Pumps have 2-inch port sizes.
Does it come wired for 115 or 230 volts?
The 1/2 horsepower Super Pump only uses 115-volt wiring. The 3/4 up to 2 horsepower motors can be wired for either 115 or 230 volts. The 2-1/2 horsepower motor only runs on 230 volts. The motors are usually prewired for 230 volts at the factory.
The voltage at the motor, when running at full speed, should not be less than 90% or more than 110% of the name plate rated voltage. Such voltage differences might overheat the motor or cause overload tripping. In the long run it will reduce the longevity of the motor.
Does it need shelter from the storm?
The pump is designed for outdoor use, but the electrical components need protection from dampness and flooding during heavy rain. All the water should be drained from the pump when freezing weather conditions are expected to prevent freeze damage.
How long does the Hayward warranty last?
It lasts for one year from date of purchase. It is a limited warranty that warrants that the pool pump is free from poor workmanship and bad materials. Defective components will be replaced under the warranty, but you might have to pay for the transportation and repair of the pump. Damage caused by negligence, poor installation and freezing are not covered by the warranty.
Hayward recommends that a licensed electrician should do all the wiring. Installation should be done by a qualified professional. The pump must be permanently connected to a ground fault circuit interrupter. Improper wiring or installation will void the Hayward warranty. It is also important to maintain the pool pump properly and replace the bearings and seals every few years.
Can you get a Hayward Super Pump with a variable speed motor?
Hayward produces a Super Pump VS model which has a variable speed permanent magnet motor. The variable speed pump is a lot more energy efficient than the single speed pump, but it costs about twice as much. You can find features and see prices for the Hayward Super Pump VS at Amazon.com.
Is the Hayward Super Pump a super pump or not?
The Hayward Super Pump is recommended for inground swimming pools. It is a single speed pool pump that runs at its highest revolutions all the time. It uses at least double the amount of electricity when compared to a variable speed pool pump. This might be one of its biggest drawbacks. It is not the most energy efficient pool pump on the market.
Installation and wiring is not difficult, but the services of an electrician and pool professional is recommended, unless you want to do it yourself. It seems that a significant number of people do the pipes and wires at their own risk. The risk is that improper installation might lead to unforeseen leaks, corrosion and pump motor failure.
A few pump owners talk about their Hayward Super Pumps that lasted for up to 10 years or more before they had to replace it. These days the pumps need to be replaced within 5 years due to motor failure. The reliability of the pump motor seems to have decreased in the last few years. You will not get 10 years of motor life from the newer motors.
|The Hayward Super Pump is a super pump even though Hayward’s quality control and customer service might not be as good as it used to be. If you want the Super Pump, then check today’s offers at Amazon.com.|